An Introduction To Solar Training

Basically, the ‘Green Energy’ idea is how our everyday needs are supplied by natural resources such as wind, tides and even geothermal heat. ‘Green’ basically means that all the energy is renewable. Often, by going back in time, we can see the value of wind power and windmills as modern energy sources. Overall, this is the method of using modern techniques to provide eco-efficiency and planet friendly options.

The home environment, for example, encompasses a range of energy ideas – including Solar Thermal and Solar Water Heating solutions. Equally there is electricity that is generated through roof-installed panels. A further factor revolves around stoves and boilers – which are known as Biomass Energy. We now also have Ground Source Heat Pumps – which draw out the heat left by the Sun. When we think about Wind Power and Hydropower we have two of the more common forms of energy generation.

Solar Thermal Energy Systems – Also known as Solar Energy, this mainly uses two, albeit different types of solar panels to get the desired results. Making hot water from solar energy is the first stage – and is known as Solar Water Heating Collection. Secondly, Photovoltaic heat collectors – often simply referred to as Solar Electrical Panels – which transform the solar radiation into electricity. Across the board, Solar Panels should be mounted on a south facing roof, at an angle of 30 degrees away from horizontal – and to some extent away from blocking trees, surrounding buildings and chimneys.

In the UK, Solar Water Power is now one of the most sought after forms of Solar Energy. These systems are very efficient – and can deliver 50 percent of a household’s hot water requirement annually. Getting a professional fitting will cost around 2-5k, however, doing the job yourself could make it as low as 500 to 1500 pounds in total.

Biomass Energy Based Systems: This is a general term for all forms of plant and animal material e.g. wood, straw, poultry litter and ‘energy crops’. Considering its ability to produce energy in the form of heat and electricity, this type of energy is extremely flexible. It is a useful point to make that the UK is one of the major producers of Biomass fuels within Europe. Added to all this, is the lack of C02 produced as a by-product of the whole process. Because the system often involves one tree being planted as another is felled, many wood crops are deemed to be sustainable sources.

‘Energy Crops’ trees such as Willow and Poplar play a major part in the process – under the banner of Short Rotation Coppice (SRC). Of equal importance is the production of perennial grasses – because of their yield of dry matter. Within this process also sits the lesser known Agricultural and Municipal Wastes. Agricultural Waste is naturally formed as a by-product of conventional agricultural activity. Municipal Waste such as food or wood can also be utilised as a biomass product.

Geo-Thermal Energy: Both warm water and electricity can be produced as by-products of the natural heating of the Earth by the Sun. Heating or cooling properties in the UK can be achieved using the ground source heat temperature of around 12 degrees centigrade. With four units replaced for every one unit of energy used, these heat pumps are very effective. Utilising the energy generated from wind turbines and solar electrical panels alongside heat source pumps, can make them alomst 100 percent renewable.

Wind Energy Programs: Without a doubt, wind energy has to be one of the oldest forms of energy production known to man. Recently though, there has been the trend to generate energy and deliver this onto the local grid. In fact, the UK has the largest wind resource within Europe. The fact remains that in the UK, there exists the ability to realise 10 percent of our electricity requirement from wind power – as opposed to the current value of just 1 percent. Although electricity is still being produced from between 2-10 p per kWh, it could be generated from as little as 2p per kWh. The financial recovery process takes around 6-9 months.

Hydropower is a method that suits the UK energy production system. The ability to utilise energy from moving water, much like wind power, has been going on for thousands of years. That aside, it is fair to say that some 2 percent of the UK’s electrical load could come from this source.

Transforming the energy of moving water into another type (with the aid of a turbine) is known as a Hydropower system. It is by either water ‘drop-offs’, or Natural River runs, that turbines can work through this process. A ‘Micro-Hydro’ system creates energy through the use of dams and sluices (that are no longer a part of the national distribution system.) This smaller form of electrical output has been recently reviewed and could allocate some 200MW of capacity to the UK system. A micro-hydro system like this would be expected to cost between 200 and 3,000 pounds per kW of the energy.

Due to the energy requirements worldwide, ‘Green Energy’ is naturally growing at a fast rate. To be fair, the UK domestic market is actually leading the resurgence, with a variety of schemes.

Electrician and Plumbers are thought to be key in providing expertise during domestic installations. A range of grants are available to support the growth of renewable energy ideas within the European market. It is by gaining the right certificates that will provide opportunities and job security for the long term. By mixing green training with those of electrical or plumbing, you could cover both angles.

(C) 2009 – S. Edwards. Pop over to Green Certification or Solar Training.

Posted in Uncategorized

Leave a Reply